Previously, the charging head network has done an in-depth evaluation of Huawei Mate 70 Pro+ 100W wired charging, Mate70 Pro+ is equipped with a new Kirin 9020 chip, adding a red maple primary color image, 5700mAh capacity battery, supporting 100W Huawei super fast charging, 80W Huawei wireless super fast charging and wireless reverse charging, this time, the charging head network will conduct an in-depth evaluation of Huawei Mate 70 Pro+ wireless fast charging, Let’s explore the charging experience of original wireless charging and third-party wireless charging.
Mobile phone introduction

The Huawei Mate 70 Pro+ is equipped with a 6.9-inch full-screen display that supports a 1-120Hz adaptive refresh rate, a 300Hz touch sampling rate, and a high-frequency PWM dimming of up to 1440Hz. In addition, the Mate 70 Pro+ is a second-generation Kunlun glass, which is still resistant to drops.

The Huawei Mate 70 Pro+’s camera module DECO continues the design concept of extreme axial symmetry, and the middle area is engraved with the words “XMAGE” of Huawei’s independent imaging brand. The module integrates a laser focus sensor, a color temperature sensor, and a microphone. The rear cameras are 50 million pixel super concentrating camera, 40 million pixel ultra wide angle, 48 million pixel super concentrating macro telephoto camera, all three are equipped with RYYB sensors, and the smallest one in the middle is a 1.5 million multispectral channel red maple primary color camera, which greatly improves the color accuracy of the photo, and the color of the film is more stable and realistic.

The HUAWEI Mate 70 Pro+ has integrated power buttons and volume adjustment buttons on the right side of the body.

The bottom of the Huawei Mate 70 Pro+ is equipped with speaker cutouts, communication antennas, USB Type-C physical charging ports, microphone cutouts, and SIM card slots. Among them, the USB Type-C port supports USB 3.1 Gen1 data transfer capability.
Wireless charging test

The charging head network will prepare the original wireless charging and third-party wireless charging for the Huawei Mate 70 Pro+ wireless charging test, let’s take a look at the adaptability.

When the HUAWEI Mate 70 Pro+ phone is paired with the HUAWEI 80W vertical wireless charger (model number: W081), the output power of the charger can reach 19.87V 4.44A 88.23W, which is in line with the advertised 80W wireless charging power.

The HUAWEI Mate 70 Pro+ with the HUAWEI 80W Vertical Wireless Charger (Model: W081) triggers the HUAWEI 80W Max Super Fast Charging Turbo animation.

Use Apple’s MagSafe charger to charge the Huawei Mate 70 Pro+ phone, and the output power of the charger can reach 9.04V 0.85A 7.70W.
Charging is tested throughout the process
In order to ensure the charging speed, we turned on the settings to turn off the battery health protection and adjust the wired charging mode to extreme speed before the test.

The following will use the Huawei 80W Vertical Wireless Charger (Model: W081) with the Huawei 100W Charger (Model: P0018) to wirelessly charge the Huawei Mate 70 Pro+.

After the power is turned on, shake hands with the 20V voltage level; The charging power in the first 1 minute can reach up to 85W; Then the power drops to around 66W and continues to charge until the 3rd minute, then the power drops to 45W and lasts until 31 minutes, then the power keeps dropping and it is fully charged at the 47th minute, the whole process is very fast.

Drawing a line chart, you can clearly see that the Huawei Mate 70 Pro+ can be charged to 50% in 19 minutes using the Huawei 80W vertical wireless charging. Charge to 80% in 31 minutes; It takes about 47 minutes to go from 0% to full charge.
Temperature test
Let’s see how the Huawei Mate 70 Pro+ controls the temperature during wireless charging, and the test was conducted in a 25°C incubator, and the temperature was taken at 10 minutes, 20 minutes, and 30 minutes.

Charge the Huawei Mate 70 Pro+ for 10 minutes with the Huawei 80W Vertical Wireless Charger, and the maximum temperature on the side is around 37.6°C.

When charging for 20 minutes, the maximum temperature on the side is about 38.7°C.

When charging for 30 minutes, the maximum temperature on the side is about 37.7°C. In general, the power of the three time nodes tested is around 45W, and the temperature is controlled at 37.6-38.7°C, which is still very good for 80W fast charging.
Summary of the charging head network
In the Huawei Mate 70 Pro+ 80W wireless charging test, the official 80W wireless fast charging can be achieved when using the original high-power wireless charger, and when using a third-party charger, such as the Apple MagSafe magnetic charger, the charging power is about 7.7W.
In terms of charging the whole process, the Huawei Mate 70 Pro+ is charged with the Huawei 80W vertical wireless charger, which can be charged to 80% in 31 minutes. It takes only 47 minutes to fully charge. In terms of temperature, within 30 minutes of charging, the power is maintained at more than 45W, and the charging temperature is 37.6-38.7°C, and the temperature control performance is quite excellent.
Overall, the Huawei Mate 70 Pro+ wireless charging has strong adaptability to the original wireless charging, and has a very good experience in charging speed, power, and temperature, while the third-party charger will greatly reduce the wireless charging experience. In addition, it is also worth noting that using the Huawei 100W charger (model: P0018) can give full play to the maximum power of Huawei’s 80W wireless charging, while other Huawei original chargers cannot stimulate the maximum power of Huawei’s 80W wireless charging very well. At present, this charger is sold separately, and it is not the same charger that comes with the mobile phone.
原创文章,作者:xqunar,如若转载,请注明出处:https://www.xqunar.com/438/